Digital Position Readout Tailstock, Mini Lathe

• This DRO kit is specifically made for the 7×10, 7×12, 7×14 and 7×16 mini lathe tailstocks
• Mounts right to the back of the tailstock to give you accurate quill depth readings
• Resolution: 0.0001″, accuracy: 0.001″
• Buttons for on/off, zero, and inch/mm

This digital position readout for the tailstock works with almost all 7×10, 7×12, or 7×14 lathes made by SIEG and uses a rotary encoder for measurements.

*NOTE*We’ve found that the bore in the gray DRO retainer from these kits generally fits most tailstock retainers, but there is some variance in tailstock retainer size. The gray DRO retainer in this kit may require some additional boring (typically less than 1/8″) in order to mount it on to your existing tailstock retainer.