- Product Specification
- Shipping
- Refund
Product Specification
Brass & Copper 3-Step Buffing Kit For Angle Grinder
Included in this kit:
4-1/2″ Felt Flap Disc x 3
Brown Tripoli Compound (first step) x 1
White Rouge Stainless Compound (second step) x 1
Jewlers Rouge Compound (third step) x 1
STEPS:
First step – Use the brown tripoli compound to remove scratches
Second Step – Use the white rouge compound for a natural luster finish.
Third Step – Use the red jewelers rouge compound for a high luster finish.
***Read our Safety Tips/Techniques below for additional use recommendations if this is your first time using this product.
The brass and copper 3 step kit is designed for use on brass an copper.
Quantity: 1 Set
Machines Used On:
-
Angle Grinders sized 4-1/2 to 5
Application:
-
Non-Ferrous MaterialsBrass and Copper
-
Dry use Only
Safety Tips/techniques:
-
Only use one buffing wheel per compound type to eliminate cross contamination between compounds. We suggest marking each buffing wheel with a marking pen for easy reference.
-
Bring the compound to a spinning buffing wheel to melt the compound onto the buffing wheel. Friction will melt the compound onto the buffing wheel surface. Make sure not to overload the buffing wheel.
-
Ensure the work piece is held firmly in place before bringing the buffing wheel to the material. Apply light pressure, let the wheel and compound do the work.
-
When removing the buffing wheel from the material, remove at a slanting downward stroke to blend buffing marks and avoid unintended spotty or streaking results.
-
Never allow the edge the of the buffing wheel make contact with the edge of your work; this can result in the machine being ripped from your hands or damage to the buffing wheel.
- Always wear properPPEto include (but not limited to)safety glasses,hearing protection,respirator, and hand protection. Keep all guards in place on your machine.
